Safety Monitor for 2 AS-i circuits

AS-i Safety Monitor for 2 AS-i circuits
Operation in advanced display mode
Subject to reasonable modifications due to technical advances Id.-No.: 103336 Issue date - 24.10.2008 EUCHNER GmbH + Co. KG
67
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen Tel. [phone] • Fax. [phone]
9.4.1 AS-I CIRCUIT (Selecting the AS-i circuit)
Main Menu || DIAGNOSIS || SAFETY SLAVES || AS-I CIRCUIT ||
Please select the required AS-i circuit using the arrow buttons and the OK button.
Than you get the diagnostic menu.
9.4.2 SAFETY SLAVES (safety oriented slaves)
Main Menu|| DIAGNOSIS || SAFETY SLAVES || SAFETY ORIENTED SLAVES ||
The list of “Safety Input Slaves” (“AS-i Safety at Work”) shows the slaves for
which the safety function has been released:
9.4.3 MONITOR
Main Menu || DIAGNOSIS || MONITOR || SAFETY MON ||
This menu contains the following sub-menus:
LPF: List of Peripheral Faults
FAULT DETECTOR: Informations about the AS-i Fault Detector
AS-I MONITOR: Display of the software states
SAFETY SLAVES: Safety input slaves
AS-I CIRCUIT 1
AS-i CIRCUIT 2
SAFETY ORIENTED
SLAVES
| 1-XX
2-XR
| 3-RR
4- | 5-
X: The channel is OK
R: The channel has released
SAFETY MON
DIAGNOSIS
LAST DIAGNOSIS
VIEW CONFIG