Safety Monitor for 2 AS-i circuits

AS-i Safety Monitor for 2 AS-i circuits
Operation in advanced display mode
Subject to reasonable modifications due to technical advances Id.-No.: 103336 Issue date - 24.10.2008 EUCHNER GmbH + Co. KG
59
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen Tel. [phone] • Fax. [phone]
In this menu you change the mode of the Monitor.
9.3.5 CLEAR SAFE CFG (delete safe configuration)
Main Menu|| AS-I SAFETY || CLEAR SAFE CFG ||
In the CLEAR SAFE CFG menu the stored safe information is deleted. This pro-
cedure is PIN protected.
9.3.6 PIN (changing the PIN)
Main Menu || AS-I SAFETY || PIN || CHANGE PIN ||
In this menu you change the PIN. This procedure is protected by entering the pre-
vious PIN.
START/STOP
STOP
CHANGE
START: Sets the Monitor to protecting operating mode
STOP: Sets the Monitor to configuration mode
CLEAR SAFE CFG
ENTER PIN
0000
OK
CHANGE PIN
ENTER PIN
0000
OK
CHANGE PIN
ENTER NEW PIN
0000
0000
OK