Safety Monitor for 2 AS-i circuits

54
Subject to reasonable modifications due to technical advances Id.-No.: 103336 Issue date - 24.10.2008 EUCHNER GmbH + Co. KG
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen Tel. [phone] • Fax. [phone]
AS-i Safety Monitor for 2 AS-i circuits
Operation in advanced display mode
If the PIN was correctly entered, the Monitor is stopped and the following informa-
tion appears:
All safety contacts (also in sequence) must be closed for the safety unit to learn
the code sequences. Incomplete code tables are not learned.
Press on ESC/Service to quit learning. It is then possible to restart the Monitor:
TEACH CODES
ENTER PIN
0000
OK
TEACHING CODES
CLOSE CONTACTS
AS-I 1:
|1-OK
2-RX | 3-RR
.... |
30-DC |31-DC
AS-I 2:
|1-OK
2-RX | 3-RR
.... |
30-DC |31-DC
....
HELP
NO SAFETY SL
MS MISSING SLAVE
X CH OK
R CH RELEASED
OK CODE LEARNED
ER CODE ERROR
DC DUPL.CODE
Information!
If all safety AS-i slaves have been successfully taught, the first line in the display
changes from TEACHING CODES to CODES LEARNED.