Safety Monitor for 2 AS-i circuits

AS-i Safety Monitor for 2 AS-i circuits
Electrical connection
Subject to reasonable modifications due to technical advances Id.-No.: 103336 Issue date - 24.10.2008 EUCHNER GmbH + Co. KG
35
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen Tel. [phone] • Fax. [phone]
7.8 Indicators and operating elements
7.8.1 LED indicators – Monitor 103303
The LED’s on the front panel of the device indicate:
fault

chip card
ready
U AS-i 1
U AS-i 2
power
The monitor is receiving sufficient power.
fault
LED on: Communications fault on the AS-i cable
LED flashing: At least 1 OSSD flashing red
ready
LED on: Startup/restart block active /
LED
flashing: External test required
U AS-i 1 / U AS-i 2
AS-i 1 / AS-i 2 receiving sufficient power