Safety Monitor for 2 AS-i circuits Instruction Manual

AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor
Table of contents
Subject to reasonable modifications due to technical advances Id.-No.: 103329 Issue date - 24.10.2008 EUCHNER GmbH + Co. KG
5
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen Tel. [phone] • Fax. [phone]
8.2.2 Description of configuration using chip card with master configuration ............... 53
8.2.3 Configuration using a chip card with complete configuration................................. 54
8.3 Safety-relevant documentation of the application...................................... 55
8.4 Diagnostic data .............................................................................................. 55
8.4.1 Switch-off history.......................................................................................................... 56
8.5 Password protection ..................................................................................... 56
8.5.1 Procedure for configuring and teaching code sequences........................................ 56
8.5.2 Function of the ESC/Service key................................................................................. 57
8.6 Safe coupling slaves on the AS-i circuits.................................................... 58
8.7 Chip card ........................................................................................................ 58
8.7.1 Unsafe data.................................................................................................................... 58
8.7.1.1 Card unformatted .........................................................................................................58
8.7.1.2 Data not compatible ..................................................................................................... 59
8.7.1.3 Card empty................................................................................................................... 59
8.7.1.4 Data compatible ........................................................................................................... 59
8.7.1.5 Data in the device and on the chip card identical......................................................... 59
8.7.1.6 Data in the device and on the chip card not identical................................................... 59
8.7.1.7 Safe data...................................................................................................................... 60
8.7.1.8 Data incompatible ........................................................................................................60
8.7.1.9 Data compatible ........................................................................................................... 61
8.7.1.10 Complete configuration ................................................................................................ 61
8.7.1.11 Data on the chip card and in the device are identical .................................................. 61
8.7.1.12 Data not identical ......................................................................................................... 62
8.7.1.13 Operating the chip card from the menu........................................................................ 62
8.7.2 Working with multiple memory banks ........................................................................ 62
9 Operation in advanced display mod.................................................64
9.1 Overview......................................................................................................... 64
9.2 Navigating through the advanced display mode ........................................ 68
9.3 PROFIBUS (main menu) ................................................................................ 69
9.3.1 PROFIBUS ADRESSE (PROFIBUS Station Address)................................................. 69
9.3.2 PROFIBUS STATUS ...................................................................................................... 69
9.4 QUICK SETUP ................................................................................................ 70
9.5 AS-I SAFETY................................................................................................... 71
9.5.1 TEACH CODES.............................................................................................................. 72
9.5.1.1 TEACH CODES – COMPLETE ................................................................................... 72
9.5.1.2 SINGLE SLAVE ........................................................................................................... 74
9.5.1.3 COUPLING SLAVE...................................................................................................... 75
9.5.1.4 INPUT CODE SEQ. ..................................................................................................... 76
9.5.2 SAFE OUTPUT CH (channels for the release circuits) .............................................. 76
9.5.3 SAFE COUPLING (optional menu)............................................................................... 77
9.5.4 START/STOP (changing the Monitor mode)............................................................... 77
9.5.5 CLEAR SAFE CFG (delete safe configuration)........................................................... 78
9.5.6 PIN (changing the PIN) ................................................................................................. 78
9.5.7 SAFE CHIPCARD........................................................................................................... 79
9.5.7.1 VIEW BANK X CONFIG (view active bank) ................................................................. 80
9.5.7.2 CARD –>MONITOR (copy card data to the Monitor) ................................................... 81
9.5.7.3 MONITOR –>CARD (copy Monitor data to the chip card) ........................................... 82
9.5.7.4 CLEAR CODES (delete code sequences) ................................................................... 84
9.5.7.5 CLEAR SAFE CARD.................................................................................................... 85
9.5.8 PROTECT (protect safe configuration) ....................................................................... 86
9.5.9 SAFETY SUBST VAL (Substitute values for input data from safe slaves) .............. 86