Safety Monitor for 2 AS-i circuits Instruction Manual
AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor
Installation
Subject to reasonable modifications due to technical advances Id.-No.: 103329 Issue date - 24.10.2008 EUCHNER GmbH + Co. KG
39
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen Tel. +49/711/75 97-0 • Fax. +49/711/753316
ASIMON 3 G2 Software
☺Press OK for Menu
Output Circuit
1:ON 2:OFF
☺ Press OK for Menu
Output Circuit
1:ON 2:OFF
The device is in the protected mode now.
Adjust the configuration in the AS-i Master, when you address the safety monitor with
the help of ASIMON 3 G2 software!
Execute Quick Setup once again in case of simulated slaves!
Please consider notes on safety in the software manual ASIMON 3 G2!