Safety Monitor for 2 AS-i circuits Instruction Manual

34
Subject to reasonable modifications due to technical advances Id.-No.: 103329 Issue date - 24.10.2008 EUCHNER GmbH + Co. KG
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen Tel. [phone] • Fax. [phone]
AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor
Installation
5.8.3 Replacing a defective AS-i Safety Slave
For additional information see manual, section <Operation in advanced display mod>.
The new slave must be able to send teaching codes and must have the same address as the old one. Only one
missing slave is allowed!
CONNECT
NEW SLAVE 17
THEN PRESS
SERVICE
ESC/Service
(3 seconds)
ESC/Service
(3 seconds)
[2]
[3]
[4]
[1]