Safety Monitor for 2 AS-i circuits Instruction Manual

AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor
Installation
Subject to reasonable modifications due to technical advances Id.-No.: 103329 Issue date - 24.10.2008 EUCHNER GmbH + Co. KG
33
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen Tel. [phone] • Fax. [phone]
5.8.2 Addressing
5.8.2.1 Assigning address 6 to slave currently at address 2
LCD
1. 41
SEARCHING SLAVE
↓
QUICK SETUP
AS-I SAFETY
OK
DIAGNOSIS
SLAVE ADR TOOL
CONNECT NEW SLAVE
SLAVE ADR TOOL
OLD ADDRESS 2
NEW ADDRESS 0
PRG
SLAVE ADR TOOL
OLD ADDRESS 2
NEW ADDRESS 15
2 x ESC
1. 15
UNKNOWN SLAVE
OLD ADDRESS
NEW ADDRESS
PRG
SLAVE ADR TOOL
OLD ADDRESS 2
NEW ADDRESS 15
PRG
OK
Master Slave
Connect module
SLAVE ADDR TOOL
SLAVE ADR TOOL
CONNECT NEW SLAVE
OLD ADDRESS
NEW ADDRESS
4x
6x
AS-I CIRCUIT 1
AS-I CIRCUIT 2
OK
OK
OK
↓
1x
OK
OK
↓