Safety Monitor for 2 AS-i circuits Instruction Manual

AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor
Appendix: example of a bidirectional safety coupling
Subject to reasonable modifications due to technical advances Id.-No.: 103329 Issue date - 24.10.2008 EUCHNER GmbH + Co. KG
173
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen Tel. [phone] • Fax. [phone]
Couple slaves:
A = Couple slave circuit 1, OSSD 1, Address 1
B = Couple slave circuit 2, OSSD 1, Address 1 (contains all EMER-
GENCY STOPs)
Configuration:
1. The couple slaves on the monitor are to be configurated
first! (AS-i Safety>Safety Coupling).
2. Deactivate the "Coupling AS-i 1" first
3. Configure the monitor from the circuit 2
4. Configure the monitor from the circuit 1
5. Activate the "Coupling AS-i 1" on the monitor from the
circuit 2.