Safety Monitor for 2 AS-i circuits Instruction Manual

AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor
Appendix: Example for startup on a Siemens S7
Subject to reasonable modifications due to technical advances Id.-No.: 103329 Issue date - 24.10.2008 EUCHNER GmbH + Co. KG
155
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen Tel. [phone] • Fax. [phone]
5. Drag the selected communication module to the table line for slot 1.
6. If desired, you can now place additional modules for the command interface
and analog value transmission in the following slots:
7. Double-clicking on the desired slot line opens a dialog window in which you
can assign the PROFIBUS communication module to the address range of
the CPU.