Safety Monitor for 2 AS-i circuits Instruction Manual

148
Subject to reasonable modifications due to technical advances Id.-No.: 103329 Issue date - 24.10.2008 EUCHNER GmbH + Co. KG
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen Tel. [phone] • Fax. [phone]
AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor
Appendix: Example for startup on a Siemens S7
Clicking on the "Open" field adds the GSD file "EUCH1746.gsd" to the hardware
catalog.
Clicking on the "Open" field adds the GSD file "EUCH1746.gsd" to the hardware
catalog.
After successful installation of the GSD file you may now open the hardware cat-
alog. The modules contained under SIMATIC 300.
5. profile rail
6. power supply e.g. PS 307 5A
7. CPUe.g. CPU 315-2 DP
are added to the project. When selecting the CPU module, note the correct hard-
ware version (identifiable by the imprint of the part number at lower left) and the
firmware version (identifiable at left beneath the cover).