Safety Monitor for 2 AS-i circuits Instruction Manual

AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor
Operation in advanced display mod
Subject to reasonable modifications due to technical advances Id.-No.: 103329 Issue date - 24.10.2008 EUCHNER GmbH + Co. KG
115
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen Tel. [phone] • Fax. [phone]
If the contrast is set so that the display can no longer be read, it can be reset to
the factory default setting as follows:
• Shut the unit off
• Press the MODE and SET keys and hold them down.
• Shut the unit on.