Safety Monitor for 2 AS-i circuits Instruction Manual

AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor
Operation in advanced display mod
Subject to reasonable modifications due to technical advances Id.-No.: 103329 Issue date - 24.10.2008 EUCHNER GmbH + Co. KG
103
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen Tel. +49/711/75 97-0 • Fax. +49/711/753316
In addition, the status of the configuration is shown in plain text.
If no AS-i slave is present at an address and none is designed in, four decimal
points are displayed instead of the configuration data.
9.6.12 AS-I MASTER (Info)
Main menu || DIAGNOSIS || AS-I MASTER ||
This function shows information about the version and features of the AS-i mas-
ter:
9.7 SLAVE ADR TOOL (Slaveadressierungstool)
Main menu || SLAVE ADR TOOL ||
This function enables setting and changing the addresses of both new and al-
ready configured AS-i slaves. This function replaces the handheld AS-i address
programming device.
0A - .... -
1A - 7A28 -C
WRONG TYPE
SWID:
31256
FEATURE STRING: 2
.B..DC2
DOA.AUT
SAFE CPU A:
31166
SAFE CPU B:
31158
UART 1:
29642
UART 2:
29642
Information Meaning
SWID Software ID for the AS-i master
FEATURE String Feature string for the AS-i master
SAFE CPU A Software ID of the SAFE CPU A
SAFE CPU B Software ID of the SAFE CPU B
UART 1 Software ID for the Safety UART 1
UART 2 Software ID for the Safety UART 2