Operating Instructions

5
2500233-01-05/19 (Translation of the original operating instructions)
Operating Instructions Safety Systems
MGB2-L1…-BR.-… / MGB2-L2…-BR.-… and MGB2-L1…-BP.-… / MGB2-L2…-BP.-…
EN
1. About this document
1.1. Scope
These operating instructions are valid for all MGB2-L1…-BR.-… / MGB2-L2…-BR.-… and MGB2-L1…-BP.-… / MGB2-L2…-BP.-….
These operating instructions, the document “Safety information and maintenance” and any enclosed data sheet form the
complete user information for your device.
Series Guard locking types System families Product versions
MGB2
L1 (guard locking by spring force)
…-BP…
from V1.0.0
…-BR…
L2 (guard locking by solenoid force)
…-BP…
…-BR…
1.1.1. Notes on older product versions
Products with lower product versions or without a version number are not described by these operating instructions. Please
contact our support team in this case.
1.2. Target group
Design engineers and installation planners for safety systems on machines, as well as setup and servicing staff possessing
special expertise in handling safety components as well as expertise in the installation, setup, programming and diagnostics
of programmable logic controllers (PLC).
1.3. Key to symbols
Symbol/depiction Meaning
BP
This section applies on operation as MGB2-BP
BR
This section applies on operation as MGB2-BR
DIP
OFF
ON
In this section attention must be paid to the DIP switch settings
Printed document
Internet
www
Document is available for download at www.euchner.com
Document on CD
DANGER
WARNING
CAUTION
Safety precautions
Danger of death or severe injuries
Warning about possible injuries
Caution Slight injuries possible
NOTICE
Important!
Notice about possible device damage
Important information
Tip Useful information