Specification

MDF , HDF , MDP Safety Data Sheet
www.eucatex.com
!
!
3!
SKIN CONTACT: Wash affected areas with soap and water. If rash or persistent irritation or
dermatitis occurs, get medical attention.
INGESTION: Not applicable under normal conditions of use. Get medical attention.
Other information :
NFPA •Health = 1, Flammability = 1, Reactivity = 0, Special Information = None
HMIS • Health = *1, Flammability = 1, Reactivity = 0, PPE = E * Chronic Health Hazard
E = Safety glasses, gloves, and a dust respirator
SECTION 3 COMPOSITION INFORMATION
MIXTURES :
These wood products are composed of wood and cured amino resins. See Section 8 for
exposure limits discussion.
Components shown below may appear in some or in various combinations in a particular MDF
product. With the exception of Formaldehyde, only hazardous components above the appropriate
cut-off limit are shown.
* Wood contains trace amounts of various chemicals present in the environment which are
absorbed by trees through natural growth. A comprehensive listing of species is available upon
request.
All products produced at EUCATEX mills are certified TO COMPLY TO THE C.A.R.B phase 2
emmisions standards of the California Air Resource Board 17 CCR 93120.2(a)
CALIFORNIA RESIDENTS: This product contains one or more chemicals known to the State of
California to cause cancer, birth defects, or other reproductive harm.
Composition
Chemical Name
Identifiers
%
Hazardous
Wood fibers *
CAS: Not Available
73% TO
93%
Yes
Urea
CAS: 57-13-6
0% TO 3%
Yes
Formaldehyde
CAS: 50-00-0
<0.1%
Yes
SECTION 4 FIRST AID MEASURE
INHALATION: Remove to fresh air. If persistent irritation, severe coughing or breathing difficulty
occurs, get medical attention.