MSDS

ManualsBrandsEUCATILE ManualsKitchen32 sq. ft. 3/16 in. x 48 in. x 96 in. Beadboard White True Bead Panel

Eucatex of North America

2550 Northwinds Parkway, Suite 235

Alpharetta, Georgia 30004

(678)-624-0160

Fax (678)-624-0621

www.eucatex.com.br

MATERIAL SAFETY DATA SHEET Last Revision March 20, 2015

PRODUCT NAME: Fiberboard – Prefinished

TRADE NAME: EUCATILE / EUCAPLAC

PRODUCT COMPOSITION :

Component

CAS #

Exposure Limits

Cancer

Designation

Weight %

Wood Dust

TLV-TWA = 1

mg/m3

MAK-1, NIOSH-

Ca, TLV-A1 NTP-

95+%

Linseed Oil

8001-26-1

TLV-TWA = 10

mg/m3

.1 - .25%

Ferric Sulfate

10028-22-5

.1 - .25%

Methyl ethyl ketoxime

96-29-7

AIHA WEEL = 10

mg/m3

<0.1%

Zirconium ethyl

hexoate

22464-99-9

TWA = 5 mg/m3

<0.1%

Cobalt neodecanoate

27253-31-2

TLV-TWA = 0.05

mg/m3 R

Group 2B

<0.1%

Hexanoic acid, 2-ethyl-

, cobalt(+2) salt

136-52-7

TWA = .1

mg/m3

Group 2B

<0.1%

Filler(1)

14808-60-7 13463-

PNOS(2)

IARC-1, NIOSH-

0 - 0.15% 0 - <0.1% 0 - 0.15% 0

SECTION 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Summary of content (6 pages)

PAGE 1
Eucatex of North America 2550 Northwinds Parkway, Suite 235 Alpharetta, Georgia 30004 (678)-624-0160 Fax (678)-624-0621 www.eucatex.com.br MATERIAL SAFETY DATA SHEET Last Revision March 20, 2015 SECTION 1.
PAGE 2
Eucatex of North America 2550 Northwinds Parkway, Suite 235 Alpharetta, Georgia 30004 (678)-624-0160 Fax (678)-624-0621 www.eucatex.com.br 67-7 107-98-2 Polyester Resin (cured) Crystalline Silica Titanium dioxide PGME TLV-TWA = 0.
PAGE 3
Eucatex of North America 2550 Northwinds Parkway, Suite 235 Alpharetta, Georgia 30004 (678)-624-0160 Fax (678)-624-0621 www.eucatex.com.br SECTION 2. HAZARDS IDENTIFICATION DESCRIPTION: Eucatile is manufactured from wet, mat formed, hot pressed eucalyptus fiber hardboard. Under heat and pressure the natural wood resins flow and bond into a material with uniform physical properties. Eucatile is prefinished with moisture resistant melamine coating and UV topcoat.
PAGE 4
Eucatex of North America 2550 Northwinds Parkway, Suite 235 Alpharetta, Georgia 30004 (678)-624-0160 Fax (678)-624-0621 www.eucatex.com.br RATE CLASSIFICATION: Flame spread rate classifications are established by the model building codes for various types of construction. The classifications commonly used are listed below: Model Code (1) Boca Class I Boca Class II Boca Class III Boca Class IV Flame Spread Rate 0-25 26-75 76-200 over 200 (2) SBCCI (Classifications are not listed.
PAGE 5
RESPIRATORY PROTECTION: Wear NIOSH/OSHA approved respirator when the permissible OSHA exposure limits to wood dust may be exceeded. EYE PROTECTION: Recommend goggles or safety glasses as conditions indicate when sawing, sanding or machining wood products. SKIN PROTECTION: Protective equipment such as gloves and outer garments may be needed to reduce skin contact. The following are wood dust exposure limits which are in accord with those recommended by OSHA in the 1989 revision of PELs.
PAGE 6
SECTION 11. DISPOSAL CONSIDERATIONS This product is not considered hazardous waste under Federal Hazardous Waste Regulations 40 CFR 261. Please be advised, however, state and local requirements for waste disposal may be different from federal regulations. Incinerate or landfill in accordance with local, state and federal requlations. SECTION 12.