User's Manual

5.2 Setting: TV out

When user want to switch the display from on device LCD to TV display, user can connect

device to TV and select PAL or NTSC as required in TV out menu by OK button. Then, the

TV display will show the same option for scanning operation. Or directly enter playback

mode to slide show captured images on TV.

5.3 Setting: Format

If the internal memory or SD card requires format by scanner, user can enter format

mode by press OK button. The default setting will be cancel format. User can press OK

button again to cancel the format or select confirm icon to confirm format the memory.

Note

If there’s no SD card inside device, the internal memory will be formatted once process

Format. Instead, if SD card is inserted in device, SD card will be formatted.

-35-