User's Manual
Table Of Contents
- Table of Contents
- Chapter 1 Introduction
- Chapter 2 Installing the SIM Card, Battery, and PC Tracker Tool
- Chapter 3 Using Your Tracker GT100
- Chapter 4 Using the PC Tracker Tool
- 4.1 Starting the PC Tracker Tool
- 4.2 Changing the Contact List Settings
- 4.3 Configuring the SMS Display Settings
- 4.4 Setting the Help Options
- 4.5 Configuring the Park Settings
- 4.6 Configuring the Surveillance/Remote Monitoring Settings
- 4.7 Configuring the Power Rule Settings
- 4.8 Changing the Direct Dial Settings
- 4.9 Configuring the Speed Alert Settings
- 4.10 Configuring the Tracking Log Settings
- 4.11 Changing the Password
- Chapter 5 Troubleshooting
- Appendix A Technical Specifications
- Appendix B Tracker GT100 Functions and LED Status
- Appendix C Short Messages (SMS) Format for GPS Data
Configuring the Speed Alert Settings
Tracker GT100 User Guide Proprietary to EU3C Company Limited Reserved 4-9
4.9 ConfiguringtheSpeedAlertSettings
From the Speed Alert Settings screen, the following settings can be configured:
• Enable or disable the speed alert function
Select Function disabled to disable the speed alert function.
Select Send message to the following numbers to send a speed alert to the user or others when the speed alert
function has been triggered. Then, click the Add button to add numbers to the alert notification call list or click the
Remove button to remove a number from the alert notification call list. Highlight a number from the notification call
list and click the Modify button to change the number.
• Speed alert option
Use the pull-down arrows to set the speed that will trigger a speed alert on highways, expressways, and local roads.
Use the pull-down arrow to set the speed unit of measure (e.g., Km/h for kilometers per hour).
Click the Update button to send the new settings to the Tracker GT100.