User's Manual
Table Of Contents
- Table of Contents
- Chapter 1 Introduction
- Chapter 2 Installing the SIM Card, Battery, and PC Tracker Tool
- Chapter 3 Using Your Tracker GT100
- Chapter 4 Using the PC Tracker Tool
- 4.1 Starting the PC Tracker Tool
- 4.2 Changing the Contact List Settings
- 4.3 Configuring the SMS Display Settings
- 4.4 Setting the Help Options
- 4.5 Configuring the Park Settings
- 4.6 Configuring the Surveillance/Remote Monitoring Settings
- 4.7 Configuring the Power Rule Settings
- 4.8 Changing the Direct Dial Settings
- 4.9 Configuring the Speed Alert Settings
- 4.10 Configuring the Tracking Log Settings
- 4.11 Changing the Password
- Chapter 5 Troubleshooting
- Appendix A Technical Specifications
- Appendix B Tracker GT100 Functions and LED Status
- Appendix C Short Messages (SMS) Format for GPS Data
Configuring the Park Settings
Tracker GT100 User Guide Proprietary to EU3C Company Limited Reserved 4-5
4.5 ConfiguringtheParkSettings
From the Park Settings screen, the following settings can be configured:
• Bread crumbing
Use the pull-down arrows to set the time interval the Tracker GT100 will use for its Trace Logging function to mark its
position.
• Park alarm trigger
Click the When detect motion to trigger the park alarm when the Tracker GT100 detects motion or click When leave
safe zone to trigger the park alarm when the device is moved from the designated safe zone.
• Safe zone location
Use the pull-down arrows to set direction and the field boxes to enter longitude and latitude for the center of the safe
zone. Use the pull-down arrows to set the safe zone radius.
Click the Update button to send the new settings to the Tracker GT100.