Specifications

ETSI

Final draft ETSI EN 300 328 V1.8.1 (2012

04)

1 Scope

The present document applies to Wide Band Data Transmission equipment.

The present document also describes spectrum access requirements to facilitate spectrum sharing with other equipment.

Wide Band Data Transmission equipment covered by the present document is operated in accordance with the ERC

Recommendation 70-03 [i.10], annex 3 or Commission Decision 2006/771/EC [i.11] (and its amendments).

Examples of Wide Band Data Transmission equipment are equipments such as IEEE 802.11™ RLANs [i.3],

Bluetooth

wireless technologies, Zigbee™, etc.

This equipment can be used in fixed, mobile or nomadic applications, e.g.:

• stand-alone radio equipment with or without their own control provisions;

• plug-in radio devices intended for use with or within a variety of host systems, e.g. personal computers,

hand-held terminals, etc.;

• plug-in radio devices intended for use within combined equipment, e.g. cable modems, set-top boxes, access

points, etc.;

• combined equipment or a combination of a plug-in radio device and a specific type of host equipment.

This radio equipment is capable of operating in the band 2,4 GHz to 2,4835 GHz.

Applications using Ultra Wide Band (UWB) technology are not covered by the present document.

The present document is intended to cover the provisions of Directive 1999/5/EC [i.1] (R&TTE Directive) article 3.2,

which states that "… radio equipment shall be so constructed that it effectively uses the spectrum allocated to

terrestrial/space radio communications and orbital resources so as to avoid harmful interference".

2 References

References are either specific (identified by date of publication and/or edition number or version number) or

non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the

reference document (including any amendments) applies.

Referenced documents which are not found to be publicly available in the expected location might be found at

http://docbox.etsi.org/Reference

NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee

their long term validity.

2.1 Normative references

The following referenced documents are necessary for the application of the present document.

[1] ETSI TR 100 028-1 (V1.4.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);

Uncertainties in the measurement of mobile radio equipment characteristics; Part 1".

[2] ETSI TS 103 051 (V1.1.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);

Expanded measurement uncertainty for the measurement of radiated electromagnetic fields".

[3] ETSI TS 103 052 (V1.1.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);

Radiated measurement methods and general arrangements for test sites up to 100 GHz".