Specifications

ETSI
Final draft ETSI EN 300 328 V1.8.1 (2012
-
04)
78
The equipment can switch dynamically between Frame Based and Load Based equipment
The CCA time implemented by the equipment: ........ µs
The value q as referred to in clause 4.3.2.5.2.2.2 .........
The equipment has implemented an non-LBT based DAA mechanism
The equipment can operate in more than one adaptive mode
e) In case of non-adaptive Equipment:
The maximum RF Output Power (e.i.r.p.): ………. dBm
The maximum (corresponding) Duty Cycle: ………. %
Equipment with dynamic behaviour, that behaviour is described here. (e.g. the different combinations of duty cycle
and corresponding power levels to be declared):
......................................................................................................................................................
......................................................................................................................................................
......................................................................................................................................................
f) The worst case operational mode for each of the following tests:
• RF Output Power
.........................................................................................
• Power Spectral Density
.........................................................................................
• Duty cycle, Tx-Sequence, Tx-gap
.........................................................................................
• Dwell time, Minimum Frequency Occupation & Hopping Sequence (only for FHSS equipment)
.........................................................................................
• Hopping Frequency Separation (only for FHSS equipment)
.........................................................................................
• Medium Utilisation
.........................................................................................
• Adaptivity & Receiver Blocking
.........................................................................................
• Occupied Channel Bandwidth
.........................................................................................
• Transmitter unwanted emissions in the OOB domain
.........................................................................................
• Transmitter unwanted emissions in the spurious domain
.........................................................................................