Specifications

ETSI
Final draft
ETSI EN 300 328 V1.8.1 (2012
-
04)
77
Annex E (informative):
Application form for testing
Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that
users of the present document may freely reproduce the application form in this annex so that it can be used for its
intended purposes and may further publish the completed application form.
The form contained in this annex may be used by the supplier to comply with the requirement contained in clause 5.3.1
to provide the necessary information about the equipment to the test laboratory prior to the testing. It contains product
information as well as other information which might be required to define which configurations are to be tested, which
tests are to be performed as well the test conditions.
This application form should form an integral part of the test report.
E.1 Information as required by EN 300 328 V1.8.1,
clause 5.3.1
In accordance with EN 300 328, clause 5.3.1, the following information is provided by the supplier.
a) The type of modulation used by the equipment:
FHSS
other forms of modulation
b) In case of FHSS modulation:
• In case of non-Adaptive Frequency Hopping equipment:
The number of Hopping Frequencies: …………..
• In case of Adaptive Frequency Hopping Equipment:
The maximum number of Hopping Frequencies: …………..
The minimum number of Hopping Frequencies: …………..
• The Dwell Time: …………..
• The Minimum Channel Occupation Time: …………..
c) Adaptive / non-adaptive equipment:
non-adaptive Equipment
adaptive Equipment without the possibility to switch to a non-adaptive mode
adaptive Equipment which can also operate in a non-adaptive mode
d) In case of adaptive equipment:
The Channel Occupancy Time implemented by the equipment: ......... ms
The equipment has implemented an LBT based DAA mechanism
• In case of equipment using modulation different from FHSS:
The equipment is Frame Based equipment
The equipment is Load Based equipment