Specifications

ETSI
Final draft ETSI EN 300 328 V1.8.1 (2012
-
04)
62
Table A.1: HS Requirements and conformance Test specifications Table (HS-RTT)
Harmonized Standard EN 300
328
The following requirements and test specifications are relevant to the presumption of conformity
under the article 3.2 of the R&TTE Directive [i.1]
Requirement
Requirement Conditionality
Test Specification
No Description
Reference:
Clause No
U/C Condition E/O
Reference:
Clause No
1 RF Output Power 4.3.1.1 or
4.3.2.1
U E 5.3.2
2 Power Spectral Density 4.3.2.2 C Only for modulations
other than FHSS
E 5.3.3
3 Duty cycle, Tx-Sequence, Tx-gap 4.3.1.2 or
4.3.2.3
C Only for non-adaptive
equipment
E 5.3.2
4 Dwell time, Minimum Frequency
Occupation & Hopping Sequence
4.3.1.3 C Only for FHSS E 5.3.4
5 Hopping Frequency Separation 4.3.1.4 C Only for FHSS E 5.3.5
6 Medium Utilisation 4.3.1.5 or
4.3.2.4
C Only for non-adaptive
equipment
E 5.3.2
7 Adaptivity 4.3.1.6 or
4.3.2.5
C Only for adaptive
equipment
E 5.3.7
8 Occupied Channel Bandwidth 4.3.1.7 or
4.3.2.6
U E 5.3.8
9 Transmitter unwanted emissions in
the OOB domain
4.3.1.8 or
4.3.2.7
U E 5.3.9
10 Transmitter unwanted emissions in
the spurious domain
4.3.1.9 or
4.3.2.8
U E 5.3.10
11 Receiver spurious emissions 4.3.1.10 or
4.3.2.9
U E 5.3.11
12 Receiver Blocking 4.3.1.11 or
4.3.2.10
C Only for adaptive
equipment
E 5.3.7
Key to columns:
Requirement:
No A unique identifier for one row of the table which may be used to identify a requirement or
its test specification.
Description A textual reference to the requirement.
Clause Number Identification of clause(s) defining the requirement in the present document unless another
document is referenced explicitly.
Requirement Conditionality:
U/C Indicates whether the requirement is to be unconditionally applicable (U) or is conditional
upon the manufacturers claimed functionality of the equipment (C).
Condition Explains the conditions when the requirement shall or shall not be applicable for a technical
requirement which is classified "conditional".
Test Specification:
E/O Indicates whether the test specification forms part of the Essential Radio Test Suite (E) or
whether it is one of the Other Test Suite (O).
NOTE: All tests whether "E" or "O" are relevant to the requirements. Rows designated "E" collectively make up
the Essential Radio Test Suite; those designated "O" make up the Other Test Suite; for those designated
"X" there is no test specified corresponding to the requirement. The completion of all tests classified "E"
as specified with satisfactory outcomes is a necessary condition for a presumption of conformity.
Compliance with requirements associated with tests classified "O" or "X" is a necessary condition for
presumption of conformity, although conformance with the requirement may be claimed by an equivalent
test or by manufacturer's assertion supported by appropriate entries in the technical construction file.