Specifications

ETSI
Final draft ETSI EN 300 328 V1.8.1 (2012
-
04)
61
Annex A (normative):
HS Requirements and conformance Test specifications
Table (HS-RTT)
The HS Requirements and conformance Test specifications Table (HS-RTT) in table A.1 serves a number of purposes,
as follows:
• it provides a statement of all the requirements in words and by cross reference to (a) specific clause(s) in the
present document or to (a) specific clause(s) in (a) specific referenced document(s);
• it provides a statement of all the test procedures corresponding to those requirements by cross reference to (a)
specific clause(s) in the present document or to (a) specific clause(s) in (a) specific referenced document(s);
• it qualifies each requirement to be either:
- Unconditional: meaning that the requirement applies in all circumstances, or
- Conditional: meaning that the requirement is dependant on the manufacturer having chosen to support
optional functionality defined within the schedule.
• in the case of Conditional requirements, it associates the requirement with the particular optional service or
functionality;
• it qualifies each test procedure to be either:
- Essential: meaning that it is included with the Essential Radio Test Suite and therefore the requirement
shall be demonstrated to be met in accordance with the referenced procedures;
- Other: meaning that the test procedure is illustrative but other means of demonstrating compliance with
the requirement are permitted.