Instruction manual

2. CAMERA ACCESS WITH INTERNET EXPLORER

This network camera can be accessed via Microsoft® Internet Explorer® and iPhone / iPad / Android mobile devices

with our self-developed program “EagleEyes” installed depending on different using situations.

Note: For details about accessing network cameras via iPhone / iPad / Android mobile devices, please

refer to http://www.eagleeyescctv.com.

Before using the camera, make sure you have configured the network settings, and the network connection is fine.

For network configurations, please refer to:

 “ADVANCED NETWORK SETUP” downloadable from www.surveillance-download.com/user/m359a.swf if your

network environment is not wireless.

2.1 Camera Login

Step1: Open your web browser, and key in http://ipaddress:portnum in the URL address box.

For example, for the IP address 60.121.46.236 and port No. 888, please key in ”http://60.121.46.236:888” into

the URL address box, and press “Enter”.

Step2: In the login page, key in the user name and password, and enter the security code from the image below if any.

Then, click “LOGIN”.

Step3: The wizard is then started.

‧ To skip the wizard and directly access the camera live view, click “Close”.

‧ To directly access the camera live view without starting the wizard for the login next time, check “Do not start wizard at login”.

Note: If you’re prompted to install “VLC player”, “Software” and “H264 Streaming Viewer”, please