Operation Manual
Epic 442 Assembly and User Manual - 35
4930659-02
Scenario 1 - T-Max® Manager Series with Complete Wireless
Connect one G2 (with Power Injector) to the Manager and one G2
to each of the tanning beds.
Install as many beds as you
like with this conguration.
Units that do not commu-
nicate with T-Max will need
a G2 and a 3W to operate. If you
have an older T-Max® Manager that
doesn’t support auto addressing, set the
address of each sunbed manually as de-
scribed in Setting the address manually.
You can place your sunbed at any location
in the series.
Scenario 2 - T-Max 3W with Wireless
In single sunbed installations, the T-Max® 3W can offer the same control
as the T-Max® Manager, eliminating the need for a Manager.
After you have set the T-Max® 3W’s, address to “0” (refer to your T-
Max® user’s guide) and the sunbed’s address to “1”, simply connect
one G2 to the T-Max® 3W and one G2 to the tanning bed.
Scenario 3 - T-Max® Manager Series with Wireless
combo
Connect one G2 (with Pow-
er Injector) to the Manager
and one G2 to a wireless
ready tanning bed. The rest
of the salon may be “daisy-
chained” together and connected
to the wireless equipped tanning
bed, eliminating the need to wire the
Manager to the tanning beds.