Operation Manual

Epic 442 Assembly and User Manual - 31
4930659-02
Slide the bench acrylic into the aluminum
channel at the back of the bench. Secure the
acrylic in place with the (2) 1/4-20x1” Phil-
lips screws at the front corners.
Loosen the 5 captive screws holding the
front canopy acrylic channel. The channel
will swing down but remain in place. Next,
place the back edge of the canopy acrylic
into the channel at the back of the canopy.
Plug the wiring harness from the exciters to
the harness in the bed. Swing the acrylic
closed and lock the front edge by swinging
the front channel closed and secure the 5
screws.