Operation Manual

Epic 442 Assembly and User Manual - 29
4930659-02
Connect all cables under the bench that were disconnected before. Remember, they are all
keyed differently. If it doesn’t t, it connects to another harness. Here’s a checklist:
Harness from canopy Wire Colors Connects to
Canopy Power Blue, Red Contactor Box
Face Tanners Multi-colored Face tanner ballast box
Fan cord Black Cord from bench lamp box
LED Red, Green, Blue, Yellow Harness from contactor box
RJ-45 timer display Black RJ-45 outlet on timer box
Exciters Red, Black Audio amp
Ground wire Green Green wire from contactor box
Bench lamp box Wire Colors Connects to
Power Blue, Black Contactor Box
Fan power in Red, Black Contactor box
Fan cord to bench fans Red, Black Fans on back panel
Fan cord to canopy Red, Black Cord from canopy
Fan cord to face tanner box Red, Black Cord from face tanner ballast box
LED Red, Green, Blue, Yellow Harness from contactor box
Face tanner ballast box Wire Colors Connects to
Power in Red, Black, White, Yellow Contactor Box
Power out Multi-colored Harness from canopy
Fan power Black Cord from bench lamp box
Body Fan Wire Colors Connects to
Power Blue, Black, Green/Yellow Contactor Box
LED Red, Green, Blue, Yellow Harness from timer box
Other Wire Colors Connects to
LED to skirt panel Red, Green, Blue, Yellow Terminal block on skirt frame
Remote White From timer box to remote board on back panel
Mp3 jack Black Cord across front of lamp box to head pedestal