Operation Manual

Epic 442 Assembly and User Manual - 17
4930659-02
BELLOWS
On the back of the canopy, toward the foot
end, is a rubber bellows protecting the wir-
ing from the bench to the canopy. Discon-
nect one end of the bellows by loosening
the clamp holding it in place.
Pull the cables from the canopy out of the
bench. You may nd it helpful to tape or tie
the cables up so they do not get in the way
when moving the canopy.
Make sure the shipping pins are in the ped-
estals. Remove the (5) 3/8-20x1” hex bolts
on each end of the canopy that attach it
to the lift system. Make sure something or
someone is holding the front of the canopy
so it does not fall.
Remove the canopy.