Operation Manual

10 - Epic 442 Assembly and User Manual
4930659-02
Find the harnesses under the bench and dis-
connect them all. Don’t worry about mixing
them up. They are all keyed to only connect
to their proper mate.
Most harnesses connect with locking re-
ceptacles, like the one shown below. Sim-
ply squeeze the “wings” on either side and
pull the connectors apart. Do not pull on the
wires.
A few of the connectors have a wire tie
around them. This wire tie is removable and
does not need to be cut.
Note: You may nd it helpful to label the
cables for ease and speed of reassembly. A
simple number on the connector with a felt
tip pen works great.