Manual

46 | Install Optional Components
3. If you do not have a shielded control room—
 Plug one Ethernet cable for each camera into any of the numbered
connectors on the network switch.
 Run each cable to a 10/100 Ethernet filter.
 Plug the cable into the external Ethernet connector on the
10/100 Ethernet filter. For a diagram of filter connections, see page 26.
If you have a shielded control room—Follow the steps listed in
Chamber With Shielded Control Room—Installation Tasks on page 35
to install the fiber optic-to-Ethernet converter.
Archived 6/3/13