Manual

Install Optional Components | 45
MULTI-CAMERA SYSTEM—ADDITIONAL PRE-INSTALLATION TASKS
For a multi-camera configuration, you will need to install one
10/100 Ethernet filter per camera, in addition to mounting the cameras.
 Install filters— Follow the 10/100 Ethernet filter installation
instructions in the separate document, 10/100 Ethernet Filter
Installation Manual. They are not included in this document.
 Mount cameras—Follow the instructions to wall-mount or
ceiling-mount a camera on page 29.
If you have a shielded control room, also install fiber optic feedthrough
connectors in the wall of the control room.
MULTI-CAMERA SYSTEM—INSTALLATION TASKS
1. Place the 10/100 network switch in the same location as the personal
computer.
2. Plug the Ethernet cable from the computer into any of the numbered
connectors on the network switch.
Archived 6/3/13