Models 3165-01, 3165-02 Absorber Nested Dual-Polarized Dual-Vivaldi Array Antenna User Manual Model 3165-01-SQ Model 3165-02-MG
ETS-Lindgren Inc. reserves the right to make changes to any product described herein in order to improve function, design, or for any other reason. Nothing contained herein shall constitute ETS-Lindgren Inc. assuming any liability whatsoever arising out of the application or use of any product or circuit described herein. ETS-Lindgren Inc. does not convey any license under its patent rights or the rights of others. © Copyright 2011–2013 by ETS-Lindgren Inc. All Rights Reserved.
Table of Contents Notes, Cautions, and Warnings ................................................ v 1.0 Introduction .......................................................................... 7 Model 3165-01 ............................................................................................ 8 Model 3165-02 ............................................................................................ 8 Mounting Options....................................................................................
3165-02 at 600 MHz and 700 MHz.................................................... 27 3165-02 at 800 MHz and 900 MHz.................................................... 28 3165-02 at 1000 MHz and 1250 MHz ................................................ 29 3165-02 at 1500 MHz and 1750 MHz ................................................ 30 3165-02 at 2000 MHz and 2500 MHz ................................................ 31 3165-02 at 3000 MHz and 3500 MHz ................................................
Notes, Cautions, and Warnings Note: Denotes helpful information intended to provide tips for better use of the product. Caution: Denotes a hazard. Failure to follow instructions could result in minor personal injury and/or property damage. Included text gives proper procedures. Warning: Denotes a hazard. Failure to follow instructions could result in SEVERE personal injury and/or property damage. Included text gives proper procedures.
This page intentionally left blank. vi www.ets-lindgren.
1.0 Introduction The ETS-Lindgren 3165 Series Absorber Nested Dual-Polarized Dual-Vivaldi Array Antenna is designed for applications that require minimum effect from the source antenna, such as in chambers where the Equipment Under Test (EUT) is illuminated from different directions. Model 3165-01-SQ Each antenna in the 3165 Series is dual-linearly polarized and capable of simultaneously measuring two orthogonal components in the field.
Model 3165-01 The Model 3165-01 has a frequency range of 700 MHz to 6 GHz, which covers most cell phone, Wi-Fi, WiMAX™, and GPS bands. It is designed to be nested in the anechoic absorber lining of a chamber, and when installed in this configuration, will exhibit very low reflectivity, even when the input ports are mismatched. The normal incidence reflectivity is approximately -40 dB for a majority of the frequency range.
Mounting Options Following are the mounting options available for the 3165-01/3165-02; for more information on mounting, contact ETS-Lindgren Sales. 3165-01-MG / 3165-02-MG The MG Series allows you to magnetically attach the antenna to a positioning system, existing bracket, or shielding. 3165-01-MG 3165-02-MG www.ets-lindgren.
3165-01-SQ / 3165-02-SQ The SQ Series includes brackets that allow you to manually adjust the pan and tilt of the antenna. These brackets mount to a 50-mm square tube. 3165-02-SQ 3165-01-SQ 3165-01-RD / 3165-02-RD The RD Series includes a fixture that allows you to manually adjust the pan and tilt of the antenna. The fixture is designed to be attached to a 50-mm (diameter) round tube. 3165-02-RD 10 Introduction www.ets-lindgren.
ETS-Lindgren Product Information Bulletin See the ETS-Lindgren Product Information Bulletin included with your shipment for the following: Warranty information Safety, regulatory, and other product marking information Steps to receive your shipment Steps to return a component for service ETS-Lindgren calibration service ETS-Lindgren contact information www.ets-lindgren.
This page intentionally left blank. 12 Introduction www.ets-lindgren.
2.0 Maintenance Before performing any maintenance, follow the safety information in the ETS-Lindgren Product Information Bulletin included with your shipment. WARRANTY Maintenance of the 3165-01/3165-02 is limited to external components such as cables or connectors. If you have any questions concerning maintenance, contact ETS-Lindgren Customer Service. Annual Calibration See the Product Information Bulletin included with your shipment for information on ETS-Lindgren calibration services. www.
Replacement and Optional Parts ETS-Lindgren may substitute a similar part or new part number with the same functionality for another part/part number. Contact ETS-Lindgren for questions about part numbers and ordering parts. Following are the part numbers for ordering replacement or optional parts for the 3165 Series Absorber Nested Dual-Polarized Dual-Vivaldi Array Antenna.
3.0 Specifications Electrical Specifications Model 3165-01 Frequency Range: Model 3165-02 700 MHz–6 GHz 400 MHz–7 GHz Cross Polarization Isolation: >25 dB Maximum Continuous Power: 5 Watts Impedance (Nominal): 50 Ω Connectors: SMA female (2) Physical Specifications 3165-01 SERIES 3165-01-MG 3165-01-SQ 3165-01-RD 19.0 cm 36.3 cm 36.3 cm 7.5 in 14.3 in 14.3 in Aperture Height: 17.8 cm 35.5 cm 35.5 cm 7.0 in 14.0 in 14.0 in Aperture Width: 17.8 cm 35.5 cm 35.5 cm 7.0 in 14.
3165-02 SERIES 3165-02-MG LENGTH 3165-02-SQ 3165-02-RD (with absorber and mounting bracket) (with absorber and mounting bracket) 58 cm (22.8 in) 66 cm (26 in) 27 cm (10.6 in) 27 cm (10.6 in) 27 cm (10.6 in) 27 cm (10.6 in) 2.6 kg (5.8 lb) 2.6 kg (5.8 lb) No Absorber: 25 cm (9.8 in) With Absorber: 42 cm (18.5 in) HEIGHT No Absorber: 24 cm (9.4 in) With Absorber: 27 cm (10.6 in) WIDTH: No Absorber: 24 cm (9.4 in) With Absorber: 27 cm (10.6 in) WEIGHT 16 1.3 kg (2.
4.0 3165-01 Typical Data 3165-01 Typical Gain www.ets-lindgren.
3165-01 Typical VSWR 18 3165-01 Typical Data www.ets-lindgren.
3165-01 Typical Cross-Port Isolation www.ets-lindgren.
3165-01 Typical Reflectivity 20 3165-01 Typical Data www.ets-lindgren.
3165-01 Typical E-Plane www.ets-lindgren.
3165-01 Typical H-Plane 22 3165-01 Typical Data www.ets-lindgren.
5.0 3165-02 Typical Data 3165-02 Typical Gain www.ets-lindgren.
3165-02 Typical VSWR 24 3165-02 Typical Data www.ets-lindgren.
3165-02 Typical Cross-Port Isolation www.ets-lindgren.
3165-02 Typical Radiation Patterns 3165-02 AT 400 MHZ AND 500MHZ 26 3165-02 Typical Data www.ets-lindgren.
3165-02 AT 600 MHZ AND 700 MHZ www.ets-lindgren.
3165-02 AT 800 MHZ AND 900 MHZ 28 3165-02 Typical Data www.ets-lindgren.
3165-02 AT 1000 MHZ AND 1250 MHZ www.ets-lindgren.
3165-02 AT 1500 MHZ AND 1750 MHZ 30 3165-02 Typical Data www.ets-lindgren.
65-02 AT 2000 MHZ AND 2500 MHZ www.ets-lindgren.
3165-02 AT 3000 MHZ AND 3500 MHZ 32 3165-02 Typical Data www.ets-lindgren.
3165-02 AT 4000 MHZ AND 4500 MHZ www.ets-lindgren.
3165-02 AT 5000 MHZ AND 6000 MHZ 34 3165-02 Typical Data www.ets-lindgren.
Appendix A: Warranty See the Product Information Bulletin included with your shipment for the complete ETS-Lindgren warranty for your Model 3165-01/3165-02. DURATION OF WARRANTIES FOR MODEL 3165-01/3165-02 All product warranties, except the warranty of title, and all remedies for warranty failures are limited to two years. Product Warranted Duration of Warranty Period Model 3165-01/3165-02 Absorber Nested Dual-Polarized Dual-Vivaldi Array Antenna 2 Years www.ets-lindgren.
