User guide

4. Thread a washer onto a screw. From the front of the antenna adapter
plate, insert the screw and washer through one of the bracket holes.
5. On the back of the mounting bracket, thread a washer onto the screw,
and then tighten a wing nut onto the screw.
6. Repeat for the remaining bracket hole.
Mounting the Model 3164 Series | 33
Archived 6/25/10
Use only the content for
3164-07 in this manual.
Disregard content for
all other 3164 models;
see ETS-Lindgren
website for other
3164 content.