Owner manual

Model 2188 Turntable

©ETS-Lindgren—January, 2006

Rev. B—P#399771

7.3. Annual Maintenance

These maintenance items should occur every twelve months after

the turntable is put into service.

• Lubricate the main bearing race. Use a grease gun with a good

quality bearing grease. The grease fittings are located inside

the race, 90 degrees apart, underneath the top. Three

discharges from the grease gun in each fitting are adequate.

Using synthetic grease, grease all casters. Mobil 1 synthetic is

recommended; do not use lithium grease.

• Lubricate the chain and sprocket of the chain drive. Apply good

quality grease to the chain and sprocket; do not use lithium

grease.