Owner manual

Model 2188 Turntable
©ETS-Lindgren—January, 2006
Rev. B—P#399771
20
3.8. Final Leveling of the Table
Once the table is in place with the floor flange and wear strip
mounted, check that the table is level. Ensure that it is level and all
screws, nuts, and collars have been tightened.
3.9. Application of Conductive Grease
Before placing the turntable into operation, apply conductive grease
to the ground brush. Apply the contents of one tube of GC
Electronics conductive grease to the brush. Apply one tube per
meter size of the diameter of the table.