Manual

Setting Travel Limits MODEL 2087 TURNTABLE SERIES
12 © EMC TEST SYSTEMS, L.P. – OCTOBER 2002
REV C – PN 399233
5. Disengaged the limit mechanism by loosening the inline
coupler and sliding the coupler at least ¼ inch back from its
mate to disengage the drive teeth.
6. Retighten the shaft set screws on the coupler.
7. Reinstall the cover and the adjustment knobs.
Once limits have been set or disengaged using the above
procedure, return the turntable to its original position by replacing
the top section.
Archived 3/18/10