Instruction Manual

Standard Configuration MODEL 2075 MINIMAST™
2 © EMC TEST SYSTEMS, L.P. – MARCH 2002
REV D – PN 399235
A safety brake is mounted on the carrier assembly. In the event
that the carrier is released from its rope suspension, a spring-
loaded lever jams the brake into position against the mast and
locks the carrier so that further vertical movement is restricted.
Mylar rope guy lines are provided for outdoor installations and
must be firmly anchored to provide vertical stability.
STANDARD CONFIGURATION
Dual-Voltage Motor: 100/115 VAC or 220/240 VAC switch-
selectable
Input frequency 50 Hz or 60 Hz
Castered platform for portability
Sectional mast
Air polarization antenna mount
Ten meter fiber-optic control cable for inside chamber
Three meter fiber-optic control cable for connection to Model
2090 outside chamber
Two ST to ST bulkhead feedthroughs
Maximum loading 10.0 kg (22.0 lb)
Overall height 4.61 m (15.1 ft) with all sections of mast
installed, sections can be removed for lower heights
Base dimensions 0.90 m by 0.90 m (2.95 ft by 2.95 ft)
Weight 81.2kg (179.0 lb)
Archived 3/18/10