Owner's manual

44 | Operation
Pre-Operational Checklist
□
Verify that the power lines are connected for the tower, controller, and any
other equipment to be used for testing.
□
Verify the fiber optic cables are connected.
□
Verify the antenna connected to the boom is securely mounted.
□
Connect the feed cable to the antenna.
□
Before moving the carrier on the mast up or down, verify there are no
people standing near the boom.
Start-Up and Shutdown
START-UP
If you are unfamiliar with the operation of the Model 2090 (or next generation
ETS-Lindgren controller, if applicable), see the manual included with the
controller. The manual is also available for download from
www.ets-lindgren.com.
After completing the pre-operational checks, turn on the Model 2090 by pressing
the power button.
SHUTDOWN
Move the carrier to an accessible height to remove the antenna and confirm the
unit has come to a complete stop. Press the power button on the Model 2090 to
turn it off.
Archived 06/24/14