User Manual

MODEL 2065 LOPRO TURNTABLE Assembly Instructions
© EMC TEST SYSTEMS, L.P. – APRIL 2002 11
REV F – PN 399230
6) Position the motor drive so that its shaft slips into the hose
coupling. The bracket installed in step 5 should now be in
place. Secure the bracket to the motorbase using the ¼ x 1-1/4”
hex head cap screws provided. Both hose clamps should be
tightened to secure the gray hose coupling around the shafts.
7) The gearbox cover can now be placed on the gearbox and the 4
bolts that hold it in place inserted and tightened.
Archived 3/18/10