User Manual

Installation MODEL 2065 LOPRO TURNTABLE
6 © EMC TEST SYSTEMS, L.P. – APRIL 2002
REV F – PN 399230
INSTALLATION
The Model 2065 turntable is shipped partially assembled. It is
anticipated that assembly will take no longer than 1 hour. Ensure
that a clear area is available to unpack, assemble and install the
turntable. Prior to starting assembly, open the shipping container
and check all parts for any shipping damage. NOTE: Do not
discard any packing material until the turntable is fully installed
and operational.
WHAT IS INCLUDED IN SHIPMENT
Attention: Completely check all packing material for parts before
discarding.
You should have received the following items:
Item Part Number Quantity
2065 Turntable Assembly 1 ea.
Motor Base Assembly 105772 1 ea.
Tie Bracket 105728 1 ea.
Standoff 890508 2 ea.
½-13 x ¾ “ Hex Bolt 910551 2 ea.
¼ x 1 – ¼” Hex Bolt 910449 2 ea.
Hose Clamp 890684 2 ea.
Hose Coupling 860204 .25 ft
Fiber-optic Cable 705344-10 1 ea.
Manual 399230 1 ea.
Shaft Kit (optional) 106555 1 ea.
TOOLS REQUIRED
Level
Adjustable Wrench
Phillips and flat head screwdrivers
Shims – if the floor surface is not level
Archived 3/18/10