User`s manual

42
The top of the page includes a preview window as well as Tilt and Zoom
controls. The arrows at the bottom of the preview window can be used for
viewing or setting left/right boundaries.
If the 360-degree Circular Scan is checked, then the remaining settings related to
the boundary scan will be disabled. Scan speed can be adjusted as needed.
To configure the angle scan, move the camera to the desired left/right boundary.
This can be done using the directional arrows in the preview window or using
the Go Preset button for a predefined point. Click the Set Left/Right Boundary
button to define the left/right boundary.
The Go to Left/Right Boundary will move the camera to the left/right boundary
if defined.
The button will swap the left & right boundary. The left boundary becomes
the right boundary, and vice versa.
The Run button can be used to preview the Auto Scan.
7.4 PTZ Control – Privacy Mask Setting
A privacy mask can be applied to regions to hide areas from viewing and
triggering motion detection.