User`s manual

29
Period Time is a time interval during which an event can not be triggered. For
example, if Period Time is set to 60, then after a specific event is triggered (e.g.
motion detection), that event can only be triggered after 60 seconds.
This applies only to a user-defined event. If 2 motion detection events have been
configured (e.g. MD1 and MD2), then if MD1 is triggered, MD2 can still be
triggered regardless of MD1’s Period Time setting.
Be sure to click SAVE in the main Event Rule screen to save any changes.
3.16 Event Handle – Event Server
The Event Server page has configuration options for event notification via email
and event driven video/images to network storage.
Email Setting
Enter the SMTP server for Server Address and all additional relevant details.
The username may only contain alphanumeric characters and the underscore
character, “_”.