User`s manual

10. ETROLINK™ CONFIG PORT – FIRST TIME
EXPERIENCE
EtroLink™ is designed for quick configuration or factory default. There is
EtroLink™ config port, a special USB port, on each product of Etrovision.
Connect the IP camera and PC via mini USB cable through EtroLink™ config
port. Please pay attention that if the IP camera is powered on, EtroLink™ will
not be operant. After finishing the configuration or factory default, please
unplug the USB cable.
NOTE: Remove USB CABLE when the quick configuration is completed.
l OS Requirement
Capability of auto/manually run of Quick Config application depends on the
OS of PC.
Unplug USB cable