Installation Guide
2 USING THE EV3150A FOR THE FIRST TIME
Properly align the wiring and terminals when connecting; an improper
connection can damage the camera.
Please review the Power Output Specications in section 1.8 before using.
To remove the cable from the digital I/O socket, press down on the wire release
and pull the cable.
2.3 Initial Network Conguration
To congure the video server’s network settings use the EtroScan™ utility.
Factory IP Address
Below are the initial factory IP address settings for the video server:
IP Address 192.168.1.2
Subnet Mask 255.255.255.0
Gateway 192.168.1.1
Restoring the factory default settings will reset the network settings to the
factory IP address settings (see the “Reset Factory Default Settings” section for
more information).
Alter the Network Domain
Alter the IP address of the PC to the same network domain of video server’s
initial IP address, 192.168.1.2.
Here is an example of PC network settings used to congure the video server