Quick Start Guide

III. Telephone Numbers Setting
Commands:
#030x#
Kindly Tips
： This command is used to check or pre-set telephone numbers, which can be choice for alert calls and so on
function need. #030x#, where x is the group item number, 1-8; Can be setting multiple phone number items, use * to
separate each item.
Examples:
A). Check parameter
User press buttons: ES005 play voice:
Step 4
Long Press Red Button
(for about 4 seconds)
to power on it.
Step 5
Set the emergency help dial phone numbers.
Here, for initial test, use your cell phone to dial a call to
number of the landline When device detect there are
incoming call, it will ring and read the incoming telephone
number, you can press the Red button to accept the call.
After the calling is contacted, you can start some configure
setting via press the keys on your cell phone, as following:
A). Enter configure mode
#**# (it will say “OK”)
B). Modify the 1
st
group telephone numbers which is default
configured for panic alerts
#0301#12345678*0012345678901##
(12345678*0012345678901 is the 2 sets telephone
numbers you want it dial. It will say”Group 1,Telephone
number will be 12345678,0012345678901”)
C). press buttons: # (it will play voice: OK)
Now, Hang up the call, Press the Help button, It will dial
emergency call to the numbers.
Con
g
re
g
ation, it works well and en
j
o
y
it.
#0301##
Group 1 telephone is
33612720,3361721,00
86137685955