Quick Start Guide

8. UP

9. Mode

10. UP Down

11. Wireless Pair

LED Lamp Indication:

1. Green: Normal standby / Everything fine

2. Green flash very slow: low battery standby

3. Green flash: calling

4. Green and red flash alternately: Detect Hardware Error, such as not plug adapter

5. Red flash quickly: No telephone line

6. Green and yellow flash shortly: Intrusion mode have enabled

7. Green flash quickly: Inactivity detect mode have enabled

8. White: wireless pare mode

9. Blue: Away mode is enable, and under normal standby

10. Blue flash very slow: Away mode is enable, and low battery standby

11.

Blue and red flash alternately: Away mode is enable, and detect Hardware Error, such as not plug adapter

Initial Operation and Installation

Step 3

Plug the DC adapter to the

Power Supply Port.

Step 1

Connect the Line port of the device to land line socket port

via an extend telephone wire.

Step 2

Connect the Telephone port of the device to normal

telephones via an extend telephone wire.