Service manual

Page 93 of 151

One way clutch Installation

• When reinstalling the components, use Teflon

tape on the thread of the hexagon bolt.

• Torque value: 1.0-1.4kgf-m / 7-10 lbf-ft

• Install the starting driven gear.

10-8 Flywheel Installation

• Align the key on the crankshaft with the flywheel

groove.

• Install the flywheel.

• Hold the flywheel by drive face with a universal

holder.

• Tighten the flywheel nut.

• Torque value: 5.0~6.0kgf-m

Special tool:

Universal Holder