Service manual

Page 90 of 151
• Check the oil seal for wear or damage.
• Replace if necessary.
• Install a new bearing (6201LU) with a bearing
driver.
Special tool:
Bearing driver
10-6 Flywheel Removal
• Remove the right crankcase cover.
• Remove the left crankcase cover.
• Hold the flywheel by the drive face with a
universal holder.
• Remove the flywheel nut.
Special tool:
Universal Holder
Copyright ©2008-2009 ETON America, llc., all rights reserved.
www.Get2itParts.com
www.Get2itParts.com
www.Get2itParts.com