Service manual

Page 68 of 151
Reassembly/Installation
• Install the weight rollers.
• The weight roller end surfaces are not
necessarily the same. In order to lengthen
the rollers’ lifetime and prevent premature wear,
install the weights in a counterclockwise
order onto the movable drive face.
• Install the ramp plate.
• Apply grease to the movable drive face axle
hole.
• Install drive face boss.
• The movable drive face surface must be free of
grease. Clean it with cleaning solvent.
• Install the movable drive face assembly onto the
crankshaft.
Copyright ©2008-2009 ETON America, llc., all rights reserved.
www.Get2itParts.com
www.Get2itParts.com
www.Get2itParts.com